Find Nano-Fit Power Connector, Single Pin Current 8A Power Connector, Wire-to-Board Power Connectors on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.

Inquiry Basket (0)
Home > Products > SMT Peripheral Equipment > 2.50 mm Pitch Power Connector

2.50 mm Pitch Power Connector

2.50 mm Pitch Power Connector

    Brand: SOLEPiN
    Transportation: Ocean
    Place of Origin: shenzhen
    Supply Ability: Powerful
    Port: Shenzhen

Product Description

2.50 mm Pitch Power Connector

Item Specification: Nano-Fit Power Connector 2.50mm Pitch Single Pin Current 8A

Material No.: WF2500-XXXXXXXXXX

Plating requirement: Gold plated

Plastic material: LCP

Production cycle: 10-15 days

Packing: tray

1. Plug-in mode: direct plug, curved plug, SMT
2. Anti-vibration frequency 5GHZ
3. Power terminal can pass current value: 8A/core
4. Product pitch: 2.50 mm Pitch
5. Wire diameter specification: 20-26AWG
6. Number of cores: 4 6 8 10 12 14 16 18 20 pos
7. Compatible with MOLEX Nano-Fit series

Wire-to-board connectors, the so-called wire-to-board connectors are connectors that connect wires and circuit boards, the function of the connector is mainly in the transmission of power and signals so wire-to-board connectors can be said to be the originator of all linkers, depending on the various uses and requirements of the different types of wire-to-board countless, but most of the information industry is to pin the distance and the transmission of current and voltage as a distinction.

The master controller serves as the data flow between the host and the wire-to-board connector device transmission. The transmission data is treated as a continuous stream of bits. Each device provides one or more interfaces that can communicate with the client program, and each interface consists of zero or more pipes that are uniquely registered to transfer data between the client program and a specific terminal of the device. Wire to Board Connector D creates the interfaces and pipes for the actual needs of the host software, and when a request for equipment is made, the host controller supplies the service based on the parameters supplied by the host software.

The wire-to-board connector supports four basic data transfer modes: control transfer, isochronous transfer, abort transfer and data block transfer. Each transfer mode has different properties when applied to terminals with the same name.

The isochronous transfer type (or synchronous transfer) supports periodic, limited delay and bandwidth data transfers between peripherals and hosts at a constant data rate. This type does not have error checking, so it does not ensure accurate data transmission, supporting the data transmission between the host computer like computer-telephone integration system (CTI) and audio system.

It supports input devices such as gamepad, mouse and keyboard, etc. The data transmission between these devices and the host is small and non-periodic, but it is sensitive to the response time and requests immediate response. Guangdong alliance en said: data block (Bulk) transfer type support printers, scanners, digital cameras and other peripherals, these peripherals and the host to transfer a large amount of data, wire-to-board connectors in the case of satisfactory bandwidth before the type of data transfer.

The control transfer type supports the transfer of control, status, equipment and other information between the peripheral and the host, providing a control channel between the peripheral and the host. Each peripheral supports the control transfer type so that equipment and command/status information can be transferred between the host and the peripheral.

2.50 mm Pitch Power Connector

Dongguan SOLEPIN Electronics Co., Ltd

 Dongguan shuoping Electronics Co., Ltd. was founded in 2015 and set up a manufacturing plant in 2017, specializing in connector R & D and production. At present, the factory covers an area of 4000 square meters, with 8 new gantry punches, 4 new KYORI elbow punches imported from Japan, 6 new Nippon precision high-speed injection molding machines imported from Japan, 60 full-automatic assembly machines, 30 full-automatic CCD detection and packaging machines. Up to now, the fixed assets of the equipment have exceeded 30million. At present, the company has more than 100 employees, 2 senior product development engineers, 2 automation machine designers, and 10 quality personnel, There are 15 managers, with an average age of no more than 35. At present, the company's main products include floating board to board connectors, power supply plus signal connectors, high-frequency transmission connectors, gold finger slot connectors, board to board connectors, FPC connectors, vehicle connectors, line to board connectors and other high-precision connectors. Can provide you with a series of electronic product connection solutions! Solepin firmly believes in continuous research and development and continuous improvement, and has invested a lot of money in research and development and improvement every year. Every year, we launch new connector products used in all walks of life. At the same time, the company has obtained the compulsory certification of ISO 9001, itaf16949, UL and TUV products. In the next few years, solepin is determined to become the most reliable strategic partner, and will also be a partner worthy of customers' reliance and continuous innovation, research, development and improvement!

Company Info

  • Company Name: Dongguan SOLEPIN Electronics Co., Ltd
  • Representative: pan xiao hua
  • Product/Service: Slot Connector , Board To Board Connector , Floating Connector , Power Connector , Wire To Board Connector , Wire Harness
  • Capital (Million US $): 5000000RMB
  • Year Established: 2015
  • Total Annual Sales Volume (Million US $): US$50 Million - US$100 Million
  • Export Percentage: 21% - 30%
  • Total Annual Purchase Volume (Million US $): US$10 Million - US$50 Million
  • No. of Production Lines: 100
  • No. of R&D Staff: 11 -20 People
  • No. of QC Staff: 21 -30 People
  • OEM Services Provided: yes
  • Factory Size (Sq.meters): 5,000-10,000 square meters
  • Factory Location: Building E, No. 1, Gaoke 1st Road, Xinlian Community, Humen Town, Dongguan City
  • Contact Person: Mr. andy wang
  • Tel: +86-0769-83077497
Email to this supplier
  • *Subject:
  • To:

  • *Messages:
    Your message must be between 20-8000 characters